• Home|
  • Applications

Mix Polo Star wall putty with 30-35% clean water slowly to make a paste. Continue the mixing for 10-15 minute till a uniform paste is formed.
Always prepare a required quantity of putty and use within 2-3 hrs. of mixing of with water.
Apply the first coat on already moistened wall surface from bottom to upward direction uniformly with help of putty blade. Leave the surface to dry at least 3 hour And then apply second coat of putty.
After the drying the first coat of putty just rub the surface gently with wet sponge with a putty blade in order to remove loose particles.
Leave the surface to dry preferably for over night.
Total thickness of the coat should be limited to maximum 1.5 mm.
Gently level the wall/ceiling surface with every fine water proof emery paper of not less then 500 number to get a glossy-white surface.

The coverage area of Polo Star wall putty on smooth normal mortar wall is 20 to 25 sq. ft/kg/mm in double coat. Coverage area, however will depend upon the quality of the substrate.

The total thickness of the coats should be limited to maximum 1.5 mm.
Putty should be done over fully cured surface.
Mixing of wall putty through hand and mechanical stirrer in order to get best Result.

© 2018 Polo Star. All rights reserved | Design by Teclive Technology Pvt. Ltd.